The electric Lupo

Datasheet : Lupo E (electric cooling)

This Lupo is intended for professional use, especially with very delicate drinks which need a very exact temperature regulation.

The machine has an active cooling element and power is supplied via an AC/DC converter. The only service it needs is to change the juice bags if they get empty. The handling is easy because the machine shows its current state by one or two 3-colour LEDs. The active cooling and the display are controlled by a modern HCMOS-RISC processor. To run this machine you need an AC-current connector and cooling liquid with less than 25°C for the active cooler.

The design is the same as for the other Lupos. You can get it with the nice spider foot and covered in a metallic colour.

Technical Data :

Dimensions ( Height x Width x Length ) :
500mm x 334mm x 342mm

Weight : 5,5kg

Cooling : via active cooling element (55W)

Temp. regulation : max. error is less than 1°C with factory programmable temperature range.

Power supply : switching AC/DC converter 15V, 4A

Power consuption : 35mA standby, 4A active

Status Display : Two 3-colour LEDs

Equipment :

- Temperature is controlled and regulated by exact digital measurement and HCMOS-RISC-processor.
- Temperatures are service programmable and exact on 1°C.
- Temperature range is displayed by an easy to interpret 3-colour LED.
- Energy saving construction of body and controller guarantees long lifetime of cooling element.
- The body is mounted with ball bearings for easy handling and a long lifetime of the machine.
- Shake controller for fruit juices is integrated.
- The standard foot is a metal plate for stand alone and no fixing on a table is needed.

Additional equipment :

- Spider foot
- Chrome plated spider foot
- Body with metallic finish

Last update:
15.12.00

By P&N Products , Huelva, Spain
and CAD / CAM engineering office Niehaus , Germany